Neck Hardware

Gather up the hardware and neck piece for the head.

• 2x M2 x 10mm long screws
• 2x M2 hex nuts

Install Neck

Fit the neck through the neck hole in the head with the mounting tabs lining up with the mounting holes.

Insert the two M2 screws through the mounting holes in the head.

Install Neck & NeoPixel Mount

Place the NeoPixel mount into the head with the mounting tabs fitted through the screws.

Neck & NeoPixel Mount Installation

Secure the assembly using the two M2 hex nuts.

Assembled Neck & NeoPixel Mount

Insert the 3-wire cable from the NeoPixel stick through the neck.