Test Circuit

Use the slide switch to power on the Feather.

Press the button to trigger audio wav files.

The NeoPixel LEDs should light up and play audio from the speaker with the micro servo rotating.

Install Battery

Place the battery into the body case so it's laid flush with the bolt.

Closing Body

Begin fitting all of the wiring into the body case.

Snap Fit Body Cover

Ensure all of the wires have been fitted into the body.

Press the cover into the body so they snap fit together.

USB Port

The USB-C connector from the Feather will be accessible on the bottom of the body.

Use the USB port to recharge the battery or to reprogram the Feather.

Finished Build

Congratulations on completing your Adabot RP2040! Use the slide switch to power it on or off. 

Press the button to trigger random audio files.

For nap time, lay Adabot on it's back to stop the servo from moving.