Switch Wire

Create a 2-wire cable using the silicon ribbon cable. Measure and cut the wire so it's 20cm in length.

Solder Switch Wires

Remove one of the pins from the slide switch and shorten the remaining pins so they're half their length.

Solder the 2-wire cable to the pins of the slide switch.

Wired Slide Switch

Double check the wires have been properly soldered to the pins of the slide switch.

Button Wire

Create a 2-wire cable using the silicone ribbon cable. Measure and cut the wire so it's 12cm in length.

Solder Button Wires

Apply a bit of solder to the pins of the button.

Solder the 2-wire cable to the pins of the button.

Wired Button

Double check the wires have been properly soldered to the pins of the button.