Button

Get the button, hex nut and slip ring ready to install to the body cover.

Install Button

Insert the button through the hole in the body cover.

Place the slip ring over the body of the button and insert the hex nut.

Securely tighten the hex nut to secure the button to the body cover.

Hardware for Servo Mount

Get the follow hardware ready to secure the servo mount to the body cover.

• 2x M2.5 x 10mm long screws
• 2x M2.5 hex nuts

Secure Servo Mount

Place the servo mount inside the body cover with the mounting holes lined up.

Insert and fasten the screws through the mounting holes.

Use the hex nuts to secure the servo mount to the body cover.

Installed Servo Mount

Double check the orientation of the servo mount has been secured correctly.