Solder NeoPixel to QT Py

Solder the cable from the NeoPixel strip to the QT Py.

  • DATA IN from NeoPixel strip to A0 on QT Py
  • GND from NeoPixel strip to GND on Qt Py
  • 5+ from NeoPixel strip to 5V on QT Py

Test Circuit

Power up the QT Py with a USB-C cable and either a computer/laptop or 5V USB battery bank. The NeoPixel LEDs should start playing the chase animation.

This guide was first published on Dec 21, 2021. It was last updated on Dec 21, 2021.

This page (Wiring QT Py) was last updated on Dec 18, 2021.

Text editor powered by tinymce.