Make a statement for your home or office that pulses with furry, glowy goodness. It's pettable, programmable, and controllable with your phone or any internet-enabled device, including Alexa or a Philips Hue Bridge. The WLED software is easy to install and set up and comes with dozens of premade animations that can be customized for nearly unlimited color and pattern variations.
We're using a Feather ESP32 V2, which connects to your phone or computer via your WiFi network, so everyone in your home can take control and create their own presets and patterns.
The software for this project is easy, but there is a fair bit of tricky soldering involved. Hang in there -- you will love your new furry friend in the end.
A power switch is optional since you can turn this on and off with your phone, but it's a nice feature to have. We have a USB-A power switch in the shop. If you prefer USB C, here's the one I used from Amazon.
Additional Materials
- White or light-colored fun fur -- you can find this at most fabric stores or online for around $25/yard.
- A piece of foam core for backing -- find this at the craft store
- Clear packing tape
- 1/2" Heat shrink
- A picture frame that's around 2" deep, or some scrap wood to make your own
- A USB cable for power
- Tools: Soldering iron & accessories, hot glue gun, heat gun, staple gun
Text editor powered by tinymce.
