Connect the battery to the MagTag, screw in the magnetic feet, and display in a convenient location.

The main program loop will update once every 24 hrs, so the battery should last a few weeks. When you need to charge, just plug in a USBC cable to the MagTag and it will charge the battery!

adafruit_products_MagTag-BatteryCharge.jpg
When battery is being charged, the yellow LED on bottom left will light up.

Happy making, friends!

This guide was first published on Feb 15, 2021. It was last updated on 2021-02-15 12:45:47 -0500.

This page (Connect Battery and Display!) was last updated on Feb 15, 2021.

Text editor powered by tinymce.