Assembly

Assembling the HandRaiser light is quite simple and requires no tools.  Just pop the Trinket into the backplate and snap on the hanger and the cover.

Firmly press the Trinket M0 onto the backplate. 

The board should be oriented so that the USB port is at the bottom of the backplate.  The top of the backplate is thinner so that the hanger can snap on - that is where the reset button should go.

Note: The fit can be snug, and you may have to press one side and then the other, but when complete the board should be secure.

Snap on the Hanger

While there are several Hanger sizes, they all attach the same way. 

Position the hanger as shown and firmly press the snap-fit grooves together.  

Choose and Attach Your Cover

We've provide four different covers you can choose: an ATMakers logo, an Adafruit Logo, a hand, and a blank cover.

Once you choose and print the cover, it's a breeze to snap it over the Trinket and onto the Backplate.

 

That's all there is to it!  Now it's time to program the Trinket and let our users get their teacher's attention.

This guide was first published on Jun 25, 2019. It was last updated on Jun 25, 2019. This page (Assembly) was last updated on Oct 03, 2019.