Very flexible. Almost silicone-like. It stretches, bends, twists and folds without deforming the printed objects original shape. Sturdy enough to hold it’s own shape and doesn’t flop over with a minimum wall thickness of 2mm.


The stress test in the photo above shows our iPhone bumpers holding 10 pounds of weight. The bumper retained its weight and didn't stretch itself out of its original shape.


In the flex test above, we see the filament can actually be tied in a knot without breaking like PLA and ABS.
Removal is easy with no spatulas required! Just pull and peel your object right off the build plate!

This guide was first published on Feb 07, 2014. It was last updated on Jan 13, 2015.

This page (Properties ) was last updated on Feb 04, 2014.

Text editor powered by tinymce.