Printing surfaces like acrylic and glass are the most common among FDM 3d printers, but today we’re talking about a very special build plate, one that actually makes it easy to remove prints, and eliminates the use of tape, glue, hair spray, and other messy substances. 

The PrintInZ Plate is a neat alternative and serves as an add on to most printers. This flexible platform is made out a unique fiberglass substrate, giving it the proprieties to bend without deforming making it easy to remove prints.   

This plate works with PLA, ABS, Ninajflex and can be safely heated to about 100c. Its extremely strong and far less likely to break than glass. The texture on the surface is very similar to blue painters tape and gives a rather leathery look to printed parts. It also features double-sided action, so you can print on both sides!

Last updated on 2015-11-23 at 03.45.31 PM Published on 2014-03-12 at 03.11.40 PM