Light up your valentine's geeky heart, with our 3dprinted AdaBot card, using LEDs and Bare Conductive Paint.

Turning the gears applies pressure to the batteries hidden inside heart, lighting up the LEDs.

This guide will show you how to print with two colors and connect LEDs with paint!

We even included a paper version!

Parts List:
5mm LEDs or 3mm LEDs for paper
Coin Cell Batteries
Bare Conductive Paint
Copper Foil Tape
• 3D Printer or Paper
Last updated on 2014-04-20 at 01.39.35 AM Published on 2014-02-04 at 04.03.15 PM