Download the printable unicorn horn file:
3D Printer
To print the unicorn horn, the 3D printer will need to be capable of printing a minimum of 140mm tall. The diameter of the horn is 40mm x 48mm, which should be enough to fit on most beds, such as the Printrbot Simple Metal.
For 3D printing with Ninjaflex material, we recommend using a printer with a direct direct, spring loaded extruder. The horn can be printed in PLA, ABS and other filaments.
Slicer Settings
For the best quality when printing with NinjaFlex, we recommend the following slicing settings:
- Retraction: Off
- Speeds: 90/150
- Extruder Temp: 230c
- Infill 10%
- Raft+Support: Off
- No Heated Bed
Print time is approximately 3 hours.
From left to right: translucent, white, glow in the dark, white
Page last edited August 04, 2015
Text editor powered by tinymce.