Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Original design source may be downloaded using the links below.

  • staro-hallowWing
  • staro-hallowWing-btm

Slicing Parts

 

Supports are required. Slice with setting for NinjaFlex 85a material. 

The parts were sliced using CURA using the slice settings below.

  • 230c extruder
  • 0.3 Initial layer height
  • .2 layer height
  • 10% gyroid infill
  • 50mm/s print speed
  • 50c heated bed

Supports

 

  • Support Extrusion Width: .2
  • Support Density: 4%
  • Support Z Height: .21
  • Interface: On
  • Support Roof: On
  • Support Pattern: Zig Zag
  • Support Roof Pattern: Zig Zag

This guide was first published on Sep 14, 2021. It was last updated on 2021-09-14 13:39:06 -0400.

This page (Printing) was last updated on Oct 23, 2021.

Text editor powered by tinymce.