Make a stand for your MacroPad RP2040! This features a hinged kick stand that allows your to prop up your MacroPad RP2040. It's a print-in-place design that can be 3D printed without any support material.
Easy Assembly
Use M3 x 6mm screws to secure the MacroPad RP2040 to the mounting holes on the base of the stand.
Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here, stands for Microcontroller because this 3x4 keyboard...
guides with product
$34.95
In Stock
Dress up your Adafruit Macropad with PaintYourDragon's fabulous decorative silkscreen enclosure and hardware kit. You get the two custom PCBs that are cut to act as a protective...
$4.95
In Stock
Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here stands for Microcontroller because this 3x4 keyboard controller...
guides with product
$49.95
In Stock
Perhaps your smart phone, tablet, or even your Raspberry Pi 4, charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow...
$4.95
In Stock
Page last edited March 08, 2024
Text editor powered by tinymce.
