In this project we’re embedding an RFID tag into a 3D printed ring. 

The micro RFID NFC tag is incredibly small and yet flexible enough to be embed into all sorts of objects.

It features a NTAG203 chip plus antenna and contains 144 bytes of read-write memory. It works with almost any NFC capable tablet and has secure 8-byte user ID.

Although we carry NFC/RFID rings in the shop, it’s much more cost effective to 3D print one and you can also customize it to any size or shape.

This guide was first published on Feb 22, 2016. It was last updated on Feb 22, 2016.

This page (Overview) was last updated on Feb 22, 2016.

Text editor powered by tinymce.