3D Printing

PLA Material

PLA is recommened to minimize warping. Both 1.75mm and 3mm filament types will work.

Enclosure Dimensions

The total size of the enclosure is just a few millimeters bigger than the Raspberry Pi A+ PCB. It's only 1.5mm thick. 

Outside: 71mm(x) 63mm (y) 20mm (z)

Slicing Parts

Slice parts using your preferred slicer. Parts are oriented to be centered on your printers build plate. They require no raft or support material to print.

Parts tested were printed on Makerbot Replicator 2 using MakerWare and Lulzbot TAZ4 using Cura.

piaplus-top.stl
piaplus-case.stl

PLA @230c
10% Infill
2 Shells
90/120mm speeds

Takes about 2.5 hours to print both parts

3D Printing Services

Check out 3D Hubs for a local directory listing of makers who own and operate desktop 3D printers that will print your parts for reasonabile prices.

This guide was first published on Dec 01, 2014. It was last updated on Dec 01, 2014. This page (3D Printing) was last updated on May 24, 2019.