Enclosures are great to use in projects because they can protect your electronics.

This is a simple two part case let's you securely mount the Rasbperry Pi A+ to the enclosure using machine screws. It features openings and cut outs for each of the ports, so it’s easily to pass cables through.

The enclosure features cutouts for USB, HDMI, A/V, MicroUSB, GPIO, MicroSD and Camera/Display cables. Use #4-40 Phillips machine screws to secure the Pi to the enclosure. Cover easily snaps on and off. Case is 1.5mm thick. 

Tools, Parts, Supplies

This guide was first published on Dec 01, 2014. It was last updated on May 13, 2024.

This page (Overview) was last updated on Nov 28, 2014.

Text editor powered by tinymce.