Materials and settings
The parts can be printed in PLA, ABS or any other hard plastic. The tripod-foot.stl part works best if printed in rubber filament. The parts are oriented in the center of the bed and ready to print "as is". Support material are not necessary for any of the parts.
tripod-leg.stl |
Legs for tripod |
text |
tripod-foot.stl |
Rubber feet for bottom of tripod legs |
text |
tripod-base.stl |
Base part for tripod d-ring screw |
text |
picam-front.stl |
Front case for Raspberry Pi camera board |
text |
picam-back.stl |
Back case for Raspberry Pi camera board |
text |
picam-adapter.stl |
Adapter for 3/8" to 1/4" camera screw |
text |
Don't have access to a 3D Printer?
You can send the STL design files to a local maker on 3DHubs to get your parts printed and shipped to you! Check out your local listing
