Overview

This is a simple project for making an 3D printed case and tripod for the Raspberry Pi camera board. It's great for photographpy and monitoring projects that need a basic stand. For example, you could use this to make a monitoring setup for an OctoPrint connected 3D printer.

You’ll need a few machine screws and other camera bits to assemble this project along with the 3D printed parts and Raspberry Pi camera module.

We have most of the parts to make this project. See the full parts list below.

Tools & Supplies

  • 3D Printer
  • Filament
  • 4x #2-56 machine screw
  • 1x M3 machine screw
  • 3x #4-40 3/8 machine screw + nuts
  • Lens for Mobile Phone
Last updated on 2015-12-03 at 09.31.22 AM Published on 2015-12-02 at 12.40.44 PM