This embedded content is from a site (www.youtube.com, flickr.com, etc) that does not comply with the Do Not Track (DNT) setting now enabled on your browser.
Clicking through to the embedded content will allow you to be tracked by the embed provider.
3D Printing + Cosplay
A perfect combination for making great things! These fire horns are 3d printed in Ninjaflex for a flexible wearable that won't poke your eyes out, giving you freedom to headbang to your hearts desire.As a hollowed out shell, you can easily to fit a strip or ring of LEDs inside these devilish horns for making an epic LED costume. We have 3 different types of horns, so you can pick the one that matches your style.
Prerequisite Guides
This guide was written for the Gemma v2 board, but can also be done with the Gemma M0, Trinket M0 or Trinket Mini. We recommend the Gemma M0 as it is easier to use and is more compatible with modern computers!
Parts
- Gemma M0, Trinket M0, Trinket Mini or Gemma v2 - We recommend using the Gemma M0.
- NeoPixel Strip/Ring
- Slide Switch
- JST Extension/Connector
- 500mAh Lithium Polymer Battery
Tools & Supplies
This embedded content is from a site (www.youtube.com, flickr.com, etc) that does not comply with the Do Not Track (DNT) setting now enabled on your browser.
Clicking through to the embedded content will allow you to be tracked by the embed provider.
Text editor powered by tinymce.
