Assemble

To make installation easier, snap the latch into the bottom part before gluing bottom to the base.
We used super glue to bond the bottom part to the base. Make sure to glue with the teeth facing towards the inside of the base with the bevels on the side as soon below. Use two small binder clips to hold the pieces together while they dry.
Once dry, slip the belt end under the teeth of the latch and pull back to grip on tight.

This guide was first published on Oct 15, 2013. It was last updated on Oct 15, 2013.

This page (Buckle Build) was last updated on Oct 14, 2013.

Text editor powered by tinymce.