We suggest using PLA material but your free to use ABS, PET or exotic composites like wood, metals and others. The parts are listed in the tablet below.


Bottom case half. HUZZAH and LED strip are mounted to this.


Top half of case. 



Panel with "On-Air" text stencil cutout.



Blank diffuser piece should be printed in transparent/white material.


Slice Settings

Depending on your 3D printers hardware, you'll need to use your prefered slice settings. The parts are oriented to print "as-is" and doesn't require any support materials (very minimal overhangs).

These are the slice settings we used on our Printrbot Play, sliced using Simplify3D

  • 220C Extruder (on a non-heated bed)
  • 20% Infill
  • 2 shells/parameters 
  • 4 top and bottom layers
  • 1.0 Extrusion multiplier 
  • 0.48 Extrusion width

Customize Design

The enclosure parts are available to modify and download. Click below to download the source. Size it to fit the bed of your 3D printer.

Download STLs

3D print the files "as-is" if they can fit on the bed of your 3D printer (case is 220mm x 90mm)

This guide was first published on Apr 22, 2016. It was last updated on Apr 22, 2016.

This page (3D Printing) was last updated on Apr 20, 2016.

Text editor powered by tinymce.