Self balancing scooters (hoverboards) can make an image stabilizer camera rig that can be used to capture smooth, low angle shoots.

Mounting a small camera to the body of the scooter can be challenging because the center part of the board twists while in operation.

With a 3D printed adapter, we can add a clamp for a camera mount to the middle of the board without obstructing riding or interfering with the position of the camera mount.

Parts List

Below is a list of parts used in this project.

Tools & Supplies

Here's a list of tools used to get this project completed. If you don't have access to a 3D printer, you can send your parts to 3DHubs.com to have them printed and shipped to you.

This guide was first published on Dec 16, 2015. It was last updated on Dec 16, 2015.

This page (Overview) was last updated on Dec 15, 2015.

Text editor powered by tinymce.