Add rocket boosters to your shoes with these 3D Printed heel clips! The Heels are compatible with the Nike x Acronym Blazer Low.

The LED animations are powered by a Circuit Playground Express. The boosters light up and a pew and pew sound plays when you stomp hard!   

These 3D Printed heels attach to the backs of each shoe with M3 thumb screws. The Circuit Playground his housed inside a clear case that attaches to the printed heel.

Alligator clips and machine screws make this assembly modular and can be reconfigured into different designs.

With MakeCode for the Circuit Playground Express or MakeCode Maker, we were able to quickly make this demo.

MakeCode an easy to use block based code editor that's great if you're just getting started.

Parts

A Black woman's manicured hand holds a round microcontroller with lit up LEDs.
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
$24.95
In Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
Adafruit Micro-Lipo Charger for LiPoly Batt with USB Type C Jack connected to Lipoly battery and USB cable.
Oh so handy, this little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any USB C cable into a USB port...
$5.95
In Stock
Bundle of Small Alligator Clip Test Leads
Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors....
$3.95
In Stock
Glowing NeoPixel Mini Button PCB wired up to a microcontroller
These are the smallest NeoPixel breakouts around! Tiny, bright RGB pixels to your project. These little PCBs are only 8mm x 10mm and have two sets of three pads on the back for...
$4.95
In Stock
1/4 to 1/4 Screw Adapter with thumb-ring
"Simplicity is the ultimate sophistication" - Leonardo da VinciThis 1/4" screw to...
$1.50
In Stock
Camera and Tripod 3/8 to 1/4 Adapter Screw
Whaddya got a screw loose or something?This 3/8" to 1/4" Adapter Screw is super handy if you're building projects that...
$1.50
In Stock
Top down view of a clear acrylic Adafruit Circuit Playground Express or Bluefruit Enclosure.
We've got nice cases for many of our beloved boards, but the Circuit Playground Express and
Out of Stock
1 x Nike x Acronym Blazer Low
Nike x Acronym Blazer Low
12 x M3 Thumb Screws
M3 Thumb Screws
6 x M2.5x5mm screws
M2.5 Metric Stainless Steel Phillips Flat Head Machine Screws
12 x M2x8mm screws
M2 Metric Stainless Steel Phillips Flat Head Machine Screws

This guide was first published on Mar 15, 2022. It was last updated on Mar 08, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.