Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slice with settings for PLA material.

The parts were sliced using CURA using the slice settings below.

PLA filament 220c extruder
0.2 layer height
10% gyroid infill
60mm/s print speed
60c heated bed
Supports: Everywhere, Angle 40 degrees

This guide was first published on Mar 15, 2022. It was last updated on Mar 16, 2022.

This page (3D Printing) was last updated on Mar 13, 2022.

Text editor powered by tinymce.

Search