Front Clip About 7 mins |
PLA @230 No Raft No Support |
2 shells 10% Infill 2.0 Layer Height 90/150mm/s |
Back Clip About 15 mins |
PLA @230 No Raft No Support |
2 shells 10% Infill 2.0 Layer Height 90/150mm/s |
Check that the groove fits your frame hinge, we want it to grip tightly around the clip.
The back clip should snap fit on to Glass with snug hung around the temple.
The fillet curves inside the temple clip allows Glass to adjust in and out of your field of view!
This guide was first published on Feb 14, 2014. It was last updated on 2014-02-14 11:25:00 -0500.
This page (3D Printing) was last updated on Feb 12, 2014.
Text editor powered by tinymce.