Wearable Frame
3D print a pair of frames for your Adafruit LED Glasses. Designed to fit any Feather compatible board! Use a STEMMA QT cable to easily connect to an Adafruit Feather.
3D Printed
The parts are secured using hardware screws and nuts. The frames feature built-in nose pads for comfort and a better fit. The arms are attached to the frames built-in hinges using hardware screws and nuts.
LED Glasses Driver nRF52840
This particular arm is designed for the LED Glasses driver board featuring the nRF52840. Use M2 x 8mm long screws and hex nuts to secure to the 3d printed arm.
Feather-Compatible
The left-arm features mounting holes sized for any Feather-compatible board like the Feather RP2040. Use a USB-C cable and a 5V battery pack for portability.
Parts from Adafruit
Have you always wanted to upgrade your ensemble with a creepy-cool creature PCB silkscreen and an eye-blistering arrangement of LEDs?
guides with product
$24.95
In Stock
This board is designed to be a thin, bluetooth-enabled driver board for our Adafruit LED Glasses RGB LED matrix. That said, it's...
guides with product
$24.95
In Stock
A new chip means a new Feather, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the Feather...
guides with product
$11.95
In Stock
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but...
$0.95
In Stock
Perhaps your smart phone, tablet, or even your Raspberry Pi 4, charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow...
Out of Stock
Totaling 420 pieces, this M3 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel...
$16.95
In Stock
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
guides with product
$16.95
In Stock
Text editor powered by tinymce.
