Finalize Band

Save Subscribe

Align the back cover to the cut out of the slide switch

3d_printing_band-cover.jpg

Press down on the edges of cover to protect the circuit.

3d_printing_press-cover.jpg

The USB cut out allows you to easily plug into to the flora to reprogram sketches.

3d_printing_flora-program.jpg

The pins on the band snap in to securely hold the body together.

3d_printing_band-pins.jpg
 Power Circuit

This guide was first published on Jan 09, 2014. It was last updated on Jan 09, 2014.

This page (Finalize Band) was last updated on Jan 07, 2014.

Text editor powered by tinymce.