3D Printed Flora Band

by Ruiz Brothers

published January 09, 2014, last updated January 09, 2014

posted in 3D Printing Wearables

45

Beginner

Project guide

Accelerometer Assembly

Position Accelerometer

Thead the 30 gauge wire through the appreciate pins on the LSM303 accelerometer sensor so its in the center and flush with the body of the band.

Lock it Down

Bend down the wiring on the LSM303 so its tightly secure into place.

Solder LSM303

Strip the wiring on the accelerometer and bend down the tips to secure the wires. Solder the pins to make the connections solid.

Clean & Trim Wiring

Trim down the access wire from the accelerometer so its nice and clean.

Text editor powered by tinymce.

Search