Trinket M0 dev board with SAMD21 chipset.
The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot...
$8.95
In Stock
Trinket wired up to two servo motor pan-tilt kit.
Deprecation Warning: The Pro Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still...
$9.95
In Stock
Hand holding Adafruit TriHand holding small Adafruit Trinket - Mini Microcontrollerket board.
Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry...
$6.95
In Stock
Type A Machines Series 1 Pro 3D Printer printing an orange vase
Built to last and better than ever. The Series 1 Pro 3D printers from Type A Machines offer durability, modularity and one of the largest...
Discontinued
Spool of PLA filament for 3D printers - Purple Translucent color with 1.75mm Diameter.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Discontinued
Stop motion of person popping a print off flexible plate
Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate.  Over time, chiseling objects off can...
Discontinued
Adafruit NeoPixel Digital RGB LED Strip wired to a microcontroller, with all the LEDs in a rainbow
We crammed ALL THE NEOPIXELS into this strip! An unbelievable 144 individually-controllable LED pixels on a flexible PCB. It's completely out of control and ready for you to...
$59.95
In Stock
close up of ends of various small heat shink tubes
Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables....
$4.95
In Stock
Array of many colorful heatshrink tubes.
Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores.  This heat shrink comes in six...
$4.95
In Stock
Front shot of JST-PH Battery Extension Cable.
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible...
$1.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
$0.95
In Stock
JST-PH 2-Pin SMT Right Angle Connector
A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of our 3.3V...
$0.75
In Stock
Lithium Ion Polymer Battery 3.7v 1200mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$9.95
In Stock
Lithium Ion Polymer Battery 3.7v 2500mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock
Adjustable 30W 110V soldering iron with US 3-prong power cord
This 'pen-style' soldering iron is just about the best entry-level tool I've seen. It's not as powerful as a Weller WES51 but it is self-contained and easy to...
$22.00
In Stock
Red and black multi-size wire stripplers, closed
These are the finest wire strippers we have used, and if you have to do a lot of wiring, you will agree! They have soft rounded grips - very comfortable to use, and precision ground...
$17.50
In Stock
Red and black diagonal flush cutters
These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years.
$7.25
In Stock
Red and black flat needle-nose pliers
These Italian-made Hakko pliers are excellent for any precision work. The nose is flattened and fairly short to provide excellent control. The inside of the jaws is also flattened so...
$14.95
In Stock
Top shot of Red Silicone Cover Stranded
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$0.95
In Stock
Top shot of Blue Silicone Cover Stranded wire
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$0.95
In Stock
Black Silicone Cover Stranded-Core Wie
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$0.95
In Stock
Green Silicone Cover Stranded-Core wire
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$0.95
In Stock
White Silicone Cover Stranded-Core Wire
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$0.95
In Stock
Yellow Silicone Cover Stranded wire
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$0.95
In Stock