Supports needed for:
• ada-head.stl
• ada-bodyL.stl
ABS @230
20% Infill
2 Shells
0.2 Layer Height
90/90 Speeds
Takes about 7 hours to print all parts

Support Material

The ada-head.stl and ada-bodyL.stl parts will need to printed with support material. Most slicing software is capable of generating support structures to aid while printing overhangs.

This guide was first published on Jun 11, 2014. It was last updated on Mar 08, 2024.

This page (3D Printing) was last updated on Mar 08, 2024.

Text editor powered by tinymce.