Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the link below.

Slicing Parts

Slice settings for NinjaFlex 85a material. 

The parts were sliced using CURA using the slice settings below.

• 230c extruder
• 0.3 Initial layer height
• .1 layer height
• 10% gyroid infill
• 50mm/s print speed
• 50c heated bed

Slice with setting for PLA material. 

The parts were sliced using CURA using the slice settings below.

• PLA filament 220c extruder
• 0.1 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed