Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Original design source may be downloaded using the links below.

  • Rat-Wand-handle
  • Rat-Wand-pommel
  • Rat-Wand-collet
  • Rat-Wand-CPX-mount
  • Rat-Wand-button-screw
  • Rat-Wand-button-top
  • Rat-Wand-box-button
  • Rat-Wand-frame-btm
  • Rat-Wand-frame-top
  • Rat-Wand-sphere-half

Slicing Parts

 

Supports are required. Slice with setting for PLA material. 

The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Supports

 

  • Support Extrusion Width: .2
  • Support Density: 4%
  • Support Z Height: .21
  • Interface: On
  • Support Roof: On
  • Support Pattern: Zig Zag
  • Support Roof Pattern: Zig Zag

This guide was first published on Aug 31, 2021. It was last updated on 2021-08-31 14:20:13 -0400.

This page (3D Printing) was last updated on May 05, 2022.

Text editor powered by tinymce.