In this project, we're 3D printing Link's Hylian Shield from The Legend of Zelda. This is over 450mm long and prints in just 2 parts. Now you can build the shield to go along with Link's wooden sword.

Parts, Tool & Supplies

If you don't have access to a 3D printer, you can send the files to a service or check with your local hackerspace/library.

This guide was first published on Jun 08, 2015. It was last updated on Jun 08, 2015.

This page (Overview) was last updated on Nov 08, 2021.

Text editor powered by tinymce.