# 3D Print Link's Hylian Shield ## Overview https://www.youtube.com/watch?v=BxlorGcJpZE ![](https://cdn-learn.adafruit.com/assets/assets/000/025/455/medium800/hacks_hero-shield.jpg?1431463870) In this project, we're 3D printing Link's Hylian Shield from The Legend of Zelda. This is over 450mm long and prints in just 2 parts. Now you can build the shield to go along with [Link's wooden sword](../../../links-3d-printed-wooden-sword). ![](https://cdn-learn.adafruit.com/assets/assets/000/025/456/medium800/hacks_hero-2.jpg?1431464061) ## Parts, Tool & Supplies If you don't have access to a 3D printer, you can send the files to a service or check with your local hackerspace/library. - [3D Printer](https://www.adafruit.com/category/128) - [Filament](https://www.adafruit.com/products/2080) - [Flush cutters](https://www.adafruit.com/product/152 "Flush cutters") - [Blue Tape](https://www.adafruit.com/products/2416) # 3D Print Link's Hylian Shield ## 3D Printing ![](https://cdn-learn.adafruit.com/assets/assets/000/025/452/medium800/hacks_printed.jpg?1431463631) ## 3D Printed Parts All you need are these 2 parts: - ShieldTop.stl - ShieldBtm.stl These parts were optimized to print on a Type A Machine series 1. Mimimum build volume is 305mm cubed. These parts can however be separated by modifying the CAD files. [Download CAD files](http://www.thingiverse.com/thing:824544) ## Slicer Settings You can use the settings below as a reference. The parts are oriented in the center of the bed and ready to print "as is".  Info: ![](https://cdn-learn.adafruit.com/assets/assets/000/025/453/medium800/hacks_support-removal.jpg?1431463652) ## Removing support material The support material is easily removabile by hand. You'll want to smooth out the handle using sand paper or a filing tool. Use flush cutter to remove any excess material from the edges with over hang. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/462/medium800/hacks_shield-cad.jpg?1431471042) ## Modify Design The parts were modeled in Autodesk 123D Design and available to modify. The file includes the original solids and sketches. ## Materials These parts have been printed in PLA but should print without any problems in other materials like bamboo and metal filaments. Materials that require a heated bed, will require an enclosure to prevent the large parts from wrapping. # 3D Print Link's Hylian Shield ## Assembly ![](https://cdn-learn.adafruit.com/assets/assets/000/025/835/medium800/hacks_hero-sticks.jpg?1433726181) ## Wooden Skinny Sticks We'll use 5 3/4 x 1/4in. wooden sticks to hold both parts together. These sticks will be inserted in the slots located on the bottom of the parts. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/467/medium800/hacks_slots.jpg?1431524152) ## Cleaning Slots There might be loose bits of plastic blocking the slots, use a pair of cutters to remove any excess material. You can carefully insert a stick into the slots to loosen up the tolerances if you find it too tight. Warning: ![](https://cdn-learn.adafruit.com/assets/assets/000/025/468/medium800/hacks_measure-sticks.jpg?1431524169) ## Measure Wooden Sticks Carefully insert each stick into the slots and measure the depth with a pencil or marker. Your tolerances will differ depending on print settings, so it's a good idea to measure each slot for changes. With the sticks marked, cut them down to size using cutters. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/438/medium800/hacks_stick-insert.jpg?1431460526) ## Insert Wooden Sticks You only need use sticks for every other slot. The extra slots are included in the design just incase you break a stick inside one of the slots.  ![](https://cdn-learn.adafruit.com/assets/assets/000/025/439/medium800/hacks_combine.jpg?1431460645) ## Join parts Line up the second half of the shield. Insert the sticks into the slots and push the two peices together, one side at a time.  ![](https://cdn-learn.adafruit.com/assets/assets/000/025/828/medium800/hacks_clay.jpg?1433616871) ## Close Seams The parts tend to warp when printing, so you'll need to close up the gaps in between the two pieces. Use a material, such as air-dry-clay, Sugru or hand-moldable plastic to fill in the seams. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/829/medium800/hacks_clay-insert.jpg?1433617049) ## Filling gaps Use filler material to close open areas in the surface of the parts. Press the material into the gaps to shape it into small flat pieces and work them into the seams. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/830/medium800/hacks_remove-excess.jpg?1433617099) ## Remove excess filler Use a spatula or a flat piece of plastic to remove excess filler from the edges of the seams. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/831/medium800/hacks_clay-sealed.jpg?1433617132) ## Drying This air-dry-clay™ requires 48 hours to fully dry. Keep in a warm dry area to help speed up curing time.  ![](https://cdn-learn.adafruit.com/assets/assets/000/025/440/medium800/hacks_mask.jpg?1431460670) ## Masking details To add color to the outer frame, we'll use masking tape to cover the inner artwork. Use a hobby knife to cut the masking tape to cover the details with curves. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/441/medium800/hacks_masked.jpg?1431460695) ## Applying Masking tape Use large pieces for large surfaces, don't worry about getting the details in the center. Cover up most of the inner details with multiple layers of tape. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/442/medium800/hacks_spray-paint.jpg?1431460709) ## Metallic colors Chrome and blue metallic spray paint gives these parts a car paint job finish. The gray pigment in the PLA acts as a primer, so you can apply chrome spray paint without any primer.  ![](https://cdn-learn.adafruit.com/assets/assets/000/025/443/medium800/hacks_spray-chrome.jpg?1431460735) ## Spray Painting Apply at least two coats of spray paint to the outer details, making sure to get all the edges. Danger: ![](https://cdn-learn.adafruit.com/assets/assets/000/025/444/medium800/hacks_sprayed-chrome.jpg?1431460759) ## Remove masking tape Let the parts dry for an hour before removing the masking tape. You can use tweezers to help remove tape from the details **.** ![](https://cdn-learn.adafruit.com/assets/assets/000/025/446/medium800/hacks_peel1.jpg?1431460775) ![](https://cdn-learn.adafruit.com/assets/assets/000/025/447/medium800/hacks_mask-chrome.jpg?1431460794) ## Masking Tape Pt II To start the next color, apply masking tape over the outer frame. The Hylian Crest and the Tri-force graphics will be printed in Ninjaflex, so we didn't need to mask these out. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/448/medium800/hacks_spary-blue.jpg?1431460817) ## Spray Paint Pt II Use the blue metallic spray paint for the inner details. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/449/medium800/hacks_peel2.jpg?1431463581) ## Outer Shield Details After another hour of drying, you can remove the masking tape revealing the final paint job. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/450/medium800/hacks_ninjaflex-add.jpg?1431463592) ## Attach Final Details To make the Hylian Crest and the Tri-force stand out, you can paint these on or use Ninjaflex filament to print these details in different colors. You can tack or glue the details on. ![](https://cdn-learn.adafruit.com/assets/assets/000/025/451/medium800/hacks_hero-with-sword.jpg?1431463614) So there you have it, now you can build the shield to go along with [Link's wooden sword](../../../../links-3d-printed-wooden-sword). Be sure to take this, it’s dangerous out there! ## Featured Products ### PrintrBot Metal PLUS 3D Printer - Black Assembled [PrintrBot Metal PLUS 3D Printer - Black Assembled](https://www.adafruit.com/product/2302) New from Printrbot, the Metal Plus is a rock solid, all metal, fully-assembled beast of a printer! The new **Printrbot Metal Plus w/ Heated Bed** is constructed of powder coated metal and machined aluminum with open platform for fabricating parts up to 10 x 10 x 10... No Longer Stocked [Buy Now](https://www.adafruit.com/product/2302) [Related Guides to the Product](https://learn.adafruit.com/products/2302/guides) ### Type A Machines Series 1 Pro 3D Printer [Type A Machines Series 1 Pro 3D Printer](https://www.adafruit.com/product/2412) Built to last and better than ever. The **Series 1 Pro 3D** printers from Type A Machines offer durability, modularity and one of the largest build volumes in their class. Featuring a streamlined aluminum and acrylic body, a glass build surface... No Longer Stocked [Buy Now](https://www.adafruit.com/product/2412) [Related Guides to the Product](https://learn.adafruit.com/products/2412/guides) ### Filament for 3D Printers in Various Colors and Types [Filament for 3D Printers in Various Colors and Types](https://www.adafruit.com/product/2080) Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance you've been printing up a storm and need something new.  That's why we've started carrying a... Out of Stock [Buy Now](https://www.adafruit.com/product/2080) [Related Guides to the Product](https://learn.adafruit.com/products/2080/guides) ### Blue Masking Tape for 3D Printing Plates [Blue Masking Tape for 3D Printing Plates](https://www.adafruit.com/product/2416) OK yes, it's just masking tape. A big honkin' roll of I'm blue da-ba-dee-da-ba-die masking tape. Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate. Over time, chiseling objects off can... No Longer Stocked [Buy Now](https://www.adafruit.com/product/2416) [Related Guides to the Product](https://learn.adafruit.com/products/2416/guides) ### Flush diagonal cutters [Flush diagonal cutters](https://www.adafruit.com/product/152) These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years. In Stock [Buy Now](https://www.adafruit.com/product/152) [Related Guides to the Product](https://learn.adafruit.com/products/152/guides) ### AstroBox pack - Includes Raspberry Pi 2, Model B [AstroBox pack - Includes Raspberry Pi 2, Model B](https://www.adafruit.com/product/2391) Slice, store, and print your 3D files from any web enabled device with the **AstroBox pack**!  [AstroPrint](https://www.astroprint.com/) is free, open source software for wirelessly managing 3D printers. It features a mobile friendly user interface that... No Longer Stocked [Buy Now](https://www.adafruit.com/product/2391) [Related Guides to the Product](https://learn.adafruit.com/products/2391/guides) ### AstroPrint 3D Printing Software for Raspberry Pi - Micro SD card [AstroPrint 3D Printing Software for Raspberry Pi - Micro SD card](https://www.adafruit.com/product/2393) AstroPrint is free, open source software for wirelessly managing 3D printers. It features a mobile friendly user interface that works across multiple devices and screen resolutions.  This makes 3D printing easier to manage, eliminating the need for SD cards or manually... No Longer Stocked [Buy Now](https://www.adafruit.com/product/2393) [Related Guides to the Product](https://learn.adafruit.com/products/2393/guides) ### Hand-Moldable Plastic - Low Temperature Thermoplastic [Hand-Moldable Plastic - Low Temperature Thermoplastic](https://www.adafruit.com/product/2504) They look a lot like sushi rice, but don't eat 'em - these are **Low Temperature Thermoplastic Beads**! Also known as "Friendly Plastic", "Instamorph", "Polymorph" and many other names These 100g bags are full of... In Stock [Buy Now](https://www.adafruit.com/product/2504) [Related Guides to the Product](https://learn.adafruit.com/products/2504/guides) ## Related Guides - [Mystical LED Halloween Hood](https://learn.adafruit.com/mystical-led-halloween-hood.md) - [Princess Peach LED Crown](https://learn.adafruit.com/bowsette.md) - [3d Printed Flower Lamp Shade](https://learn.adafruit.com/3d-printed-flower-lamp-shade.md) - [TRON Hoodie](https://learn.adafruit.com/tron-hoodie.md) - [Adafruit PC Joystick to seesaw I2C Adapter](https://learn.adafruit.com/adafruit-pc-joystick-to-seesaw-i2c-adapter.md) - [Re-MakeCode the Classics: Arkanoid](https://learn.adafruit.com/re-makecode-the-classics-arkanoid.md) - [3D Printed Gunblade](https://learn.adafruit.com/3d-printed-gunblade.md) - [Magical Light-up Dreidel](https://learn.adafruit.com/magical-light-up-dreidel.md) - [Explore Magic Cap, a smartphone OS from a decade before the iPhone](https://learn.adafruit.com/magic-cap-the-smartphone-os-from-the-90s.md) - [Forecast the Weather at Home with a No-Code Barometer ](https://learn.adafruit.com/dps310-analog-barometer.md) - [Flora Brake Light Backpack](https://learn.adafruit.com/flora-brakelight-backpack.md) - [LED Emerald with Circuit Playground Bluefruit](https://learn.adafruit.com/led-emerald-with-circuit-playground.md) - [Stepper Motor Turntable](https://learn.adafruit.com/stepper-motor-turntable.md) - [LED Masquerade Masks](https://learn.adafruit.com/led-masquerade-masks.md) - [DOOM Keeb](https://learn.adafruit.com/doom-keeb.md)