Retro Pixel Display

This is a square pixel display that uses an 32x32 RGB matrix display. It's powered by the Feather RP2040 and RGB Matrix FeatherWing. This runs CircuitPython and the Matrix Portal Library to play animated sprite sheets on the display.

RP2040 & RGB Matrices

The Feather RP2040 and RGB Matrix FeatherWing are mounted to a 3D printed frame on the back of the display. Paired with the FeatherWing Doubler, it’s easy to swap out the Feathers for future projects. 

Black LED Acrylic

A sheet of black LED acrylic fits over the display and diffuses the LEDs. The 3D printed grid fits over the PCB with each LED enclosed in a square. This separates each LED and blocks the light from leaking into each square.

Prerequisite Guides

Take a moment to walk through the following guides:

Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them...
$39.95
In Stock
Ahoy! It's time to create a dazzling light up project with our new RGB Matrix FeatherWing. Now you can quickly and easily create...
$7.50
In Stock
A new chip means a new Feather, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the Feather...
$11.95
In Stock
A nice whoppin' slab of some lovely black acrylic to add some extra diffusion to your LED Matrix project. This material is 2.6mm (0.1") thick and is made of special cast...
$9.95
In Stock
This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our
$7.50
In Stock
This is a beefy switching supply, for when you need a lot of power! It can supply 5V DC up to 10 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan...
$29.95
In Stock

This guide was first published on Apr 16, 2021. It was last updated on 2021-06-08 12:05:38 -0400.

This page (Overview) was last updated on Dec 04, 2021.

Text editor powered by tinymce.