Pi + PiTFT Case
A simple 3D printed case will keep the Raspberry Pi and PiTFT display protected and enclosured. This 2-piece case is snap-fit together and requires no hardware screws to assemble. All of the ports from the Raspberry Pi 2/3 are accessible.
This case was designed for the Pi 2/3 model B and the PiTFT Plus 3.5" PiTFT PID 2441 NOT PID 2097
pitft35-bot.stl |
Bottom half of case |
|
pitft35-top.stl |
Top half of the case |
|
pistand.stl |
Stand for the PiTFT |
Requires support material |
