This tutorial is for the original 2.8" TFT breakout, we have an updated tutorial now at https://learn.adafruit.com/adafruit-2-dot-8-color-tft-touchscreen-breakout-v2 for the most recent version of this product, but are keeping this tutorial for historical reference
We wanted to make sure that you could easily put this display in a box. There are four mounting holes on tabs. If you really don't need the tabs they can be cut off with a hacksaw or tin-snips. The holes are 2.25" apart in the short direction and 2.95" apart in the long direction. The drill holes are 0.125" and will easily take a #4 imperial or M3 (3mm) screw. The PCB is 0.063" thick.
This guide was first published on Dec 17, 2012. It was last updated on Dec 17, 2012.
This page (Mounting Options) was last updated on Dec 13, 2012.
Text editor powered by tinymce.