You Will Need

Save Subscribe
To build this project, you will need the following items:
Raspberry Pi (we're using the Model B)
Adafruit 16x32 RGB LED Matrix - we're using 3 of them!
5V 4A (2 panels any design, or 3 panels with text or otherwise not filling up all the pixels with bright color) or
5V 10A Power Supply (any number of panels, any designs)
2.1mm to Screw Jack Adapter - to connect the 5V power adapter to the panels
14 x Female-Female jumper wires. You can use 6" ones or 12" ones.
6 x Male-Male jumper wires - you can also just use wire.
Raspberry Leaf - helps make wiring easier
 Overview Wiring the Displays 

This guide was first published on Apr 02, 2014. It was last updated on Apr 02, 2014.

This page (You Will Need) was last updated on Apr 01, 2014.

Text editor powered by tinymce.